3D Printer Technical Support in India
Stuck with a failed print, a setup step or a spare part? Try the quick fixes below, open the official guide for your brand, or message us. We support the printers, scanners and filaments we sell.
Need help right now?
Share your printer model and a photo or short video of the problem.
- WhatsApp: +91 80913 55155
- Email: Support@voxelstudio.co.in
- Contact form: Send an enquiry
Before you contact us
Having these ready helps us solve the problem in fewer messages.
Your details
Printer or scanner model, order number and the date you received it.
The problem
A clear photo or a short video showing the issue as it happens.
Your setup
Firmware version, slicer name and settings, and the filament or resin brand.
What you tried
Any fixes you already tried, so we do not repeat them.
Quick fixes for common problems
These simple checks solve most print issues.
Print not sticking to the bed
Clean the plate with isopropyl alcohol, re-run auto leveling and check the first layer height. Use the bed temperature your filament maker recommends.
Stringing or oozing
Dry the filament, lower the nozzle temperature a little and check the retraction settings in your slicer.
Clogged nozzle or weak extrusion
Run a cold pull or swap the nozzle, check the filament path for tight bends and make sure the spool unwinds freely.
Resin print failures
Check the FEP film for cloudiness or damage, re-level the build plate, clean the vat and confirm the exposure settings for your resin.
Layer shifts or rough walls
Check belt tension, tighten loose pulleys and screws, and lower the print speed to see if the surface improves.
Filament feed or AMS jams
Untangle the spool, check the PTFE tubes for kinks and clean the feeder gear of dust or debris.
Official support by brand
Each link opens the official support site or wiki of the brand, with manuals, firmware and troubleshooting guides.
How we help
Message us
Send your printer model, order number and a photo or video of the issue.
We find the cause
We check your details and tell you what is likely wrong.
Fix or spare part
You get a step-by-step fix, or we help you order the right part.
Warranty guidance
If it is a warranty case, we guide you through the brand process.
Support FAQ
Where do I find firmware and software for my printer?
Download them from the official site of your printer brand. Our 3D printing software page lists the main downloads, and the brand support links on this page open each official wiki.
How do I claim warranty on a printer I bought from Voxelstudio?
Message us on WhatsApp with your order number, the printer model and a short video or photos of the problem. We guide you through the claim as per the brand warranty policy.
My prints are failing. Where should I start?
Check the quick fixes above: clean the bed, confirm the nozzle or resin vat is clear, dry your filament and re-level. If it still fails, send us a photo of the print and your slicer settings.
Can I get help if I bought the printer elsewhere?
Our first priority is customers who bought from Voxelstudio. For other printers, the official brand wiki linked above is the best starting point, and you can still message us with your question.
Do you help with spare parts?
Yes, for the brands we sell. Send the printer model and the part you need on WhatsApp and we will confirm availability and price.
Which slicer should I use?
Use the slicer recommended by your brand, such as Bambu Studio for Bambu Lab printers. Our 3D printing software page compares the popular options for FDM and resin printers.
Still need help with your printer?
Send us the details and we will get back to you with a fix.