Anycubic Photon P1 Resin 3D Printer | 14K | 223×126×230mm

Anycubic Photon P1 Resin 3D Printer: Overview

The Anycubic Photon P1 is a 14K resin 3D printer built for people who want detailed, repeatable prints without a long setup routine. A 10.1-inch monochrome LCD with 13312 × 5120 pixels (16.8 × 24.8 μm XY pixel size) draws fine detail, while a 223 × 126 × 230 mm (6.5 L) build volume gives enough room for miniatures, BJD parts, prototypes and small production batches.

It also handles thicker resins that many hobby printers struggle with. The Photon P1 is engineered for viscous resins up to 8000 cps, and it pairs that with factory-calibrated auto-leveling, dynamic release control and a thermal-controlled resin vat. If you are looking for the Anycubic Photon P1 price in India from a seller that understands resin printing, Voxelstudio lists it with local support.

Key Features of the Anycubic Photon P1

14K Monochrome LCD with Fine XY Detail

The 10.1-inch 14K LCD (13312 × 5120 px) gives a 16.8 × 24.8 μm XY pixel size. For figurines, jewelry masters, dental-style detail work and tabletop miniatures, that means crisp edges and clean small features.

LighTurbo 4.0 Optical System

Anycubic’s LighTurbo 4.0 combines an aspherical Fresnel lens with full-screen rolling calibration and an 8 mm copper cooling system. Anycubic reports light uniformity above 92% across the screen, which helps keep exposure consistent from one corner of the plate to the other.

Precision-Ground Steel Build Plate

The steel build plate is precision-ground for flatness, and the Z-axis uses an industrial-grade ball screw with linear guide rails for a repeat positioning accuracy of ±0.01 mm. A stable Z-axis matters for layer consistency on tall or heavy prints.

Wave Release Technology

The release film uses Wave Release Technology, which Anycubic says reduces release force by about 60% compared with traditional smooth-surface NFEP film. Lower peel force is easier on both the model and the film, and it supports more reliable large-area prints.

Intelligent Leveling System 3.0

The printer arrives factory-calibrated and performs an auto-leveling self-check before printing. A Leveling-Assist mode shows real-time force values at the four corners of the platform if you want to fine-tune it by hand.

Dynamic Release 3.0 and Light-Off Compensation 3.0

Dynamic Release 3.0 monitors layer separation force in real time and adjusts lift height and speed. Light-Off Compensation 3.0 estimates resin flow-back and adjusts the light-off time for each layer, so you do not have to hand-tune lift settings for every model.

Intelligent Print Inspection

Built-in checks cover build plate installation, bottom layer separation, resin level and residue detection. The AI-based detection is switched off by default and needs to be enabled by the user.

Thermal-Controlled 1000 ml Resin Vat

The integrated thermal control keeps the resin temperature up to 40°C, which improves flow and consistency with viscous resins. Smaller models can be printed with less resin, and simultaneous dual-colour or dual-material printing is possible with Anycubic’s optional dual-material printing kit.

Everyday Usability

Practical touches include a resin drip hanger, a stepless hinged lid, a quick-release build plate and resin vat, an improved pouring spout, a quick-release exposure screen and quiet operation at 45 dB or lower. An optional Air Pure 2.0 accessory is available for odour reduction. Connectivity is Wi-Fi plus Ethernet, with an integrated camera for remote monitoring through the Anycubic App.

Photon Workshop 4.0 and Open Slicer Support

The printer works with Anycubic’s Photon Workshop software, which includes an improved auto-support algorithm and custom support painting. Anycubic lists Chitubox, Lychee and Tango as compatible slicers as well.

Anycubic Photon P1 Technical Specifications

What’s in the Box

• Anycubic Photon P1 resin 3D printer
• Print platform (build plate)
• Resin vat
• Wet wipes
• Hex key set
• Protective equipment
• Filter
• Scrapers
• USB drive
• Power cord
• User manual

Resin is not included. You will also need isopropyl alcohol or a water-washable resin workflow, gloves and a curing setup, such as Anycubic’s Wash & Cure station.

Who Is the Anycubic Photon P1 For?

• Miniature and figurine makers: the 14K screen resolves small details cleanly.
• BJD and doll makers: the printer supports Anycubic’s BJD Wear-resistant resin for smooth, strong parts.
• Product designers and engineers: factory calibration and ball-screw Z-axis support repeatable prototypes.
• Small studios and print farms: a quiet machine with Wi-Fi, Ethernet and remote monitoring fits an office or a workshop.
• Upgraders: anyone moving from an older 4K or 8K resin printer who wants more detail and less fiddling.

Anycubic Photon P1: Frequently Asked Questions

What is the price of the Anycubic Photon P1 in India?

The Anycubic Photon P1 is listed on Voxelstudio at the price shown on this page, with GST invoice and delivery across India. Prices can change, so check the live listing before you order.

What is the build volume of the Photon P1?

It is 223 × 126 × 230 mm, which is 6.5 litres.

Can the Photon P1 print thick resin?

Yes. Anycubic engineered it for resins up to 8000 cps, and the thermal-controlled vat keeps resin temperature up to 40°C to help flow.

Does the Photon P1 need manual leveling?

The printer is factory-calibrated and runs an auto-leveling self-check before each print. A Leveling-Assist screen is available if you want to fine-tune the platform.

Which slicer software works with the Photon P1?

Anycubic’s Photon Workshop is the main slicer, and Anycubic also lists Chitubox, Lychee and Tango as compatible.

Buy the Anycubic Photon P1 from Voxelstudio

Voxelstudio is an India-based 3D printing store. When you buy a resin 3D printer from us, you get help with unboxing and first-print setup, plus assistance with manufacturer warranty claims. Contact us for current warranty terms and delivery timelines.