Anycubic Photon P1 Max Resin 3D Printer | 12K | 285.5×214×300mm

Anycubic Photon P1 Max Resin 3D Printer: Large-Format 12K Printing

The Anycubic Photon P1 Max is a large-format 12K LCD resin 3D printer built for makers, miniature painters, product designers and small studios who want a big build volume without giving up fine detail. It offers an 18.3 L print space of 285.5 × 214 × 300 mm, a 14-inch monochrome 12K screen, a steel build plate and a heated 1.9 L resin vat that can handle thick, high-viscosity resins.

Looking for the Anycubic Photon P1 Max price in India? Voxelstudio offers it with GST billing and local after-sales support, so you can order a ready-to-use resin printer without import hassle.

Key Features of the Anycubic Photon P1 Max

18.3 L Full-Scale Build Volume

With a print size of 285.5 × 214 × 300 mm, you can print tall figures and large props in one piece, or fill the plate with many smaller parts at once. This is the biggest advantage of the P1 Max when you compare it with compact desktop resin printers.

14-inch 12K Monochrome LCD

The 14-inch screen has a resolution of 11520 × 8640 pixels with 24.8 × 24.8 μm square pixels. The fine, square pixel grid helps reduce jagged edges, so curved surfaces and small details look smooth. The exposure screen is rated for 2000 hours of service life and is quick-release, which makes replacement easier.

COB Light Source with Uniform Exposure

A COB light source paired with an aspherical Fresnel lens keeps the light collimated to within 3 degrees. Anycubic quotes more than 92% illumination uniformity (measured at 208 points), and an 8 mm copper cooling system keeps light output stable. Even exposure across a large plate means parts at the edges print as reliably as those in the centre.

Precision Motion System

The Z axis uses C7-grade ball screws with dual linear guide rails, giving a repeat positioning accuracy of ±0.01 mm. The build platform is precision-ground steel, which helps with flatness and consistent first-layer adhesion.

Wave Release Technology

The Wave Release film lowers release force by about 60% during the lift cycle compared with standard smooth NFEP film (Anycubic lab data). Lower peel force puts less stress on each layer and supports faster, more dependable print cycles.

1.9 L Thermal-Controlled Resin Vat for 8000 cps Resin

The 1.9 L vat actively holds resin temperature up to 35 °C, which keeps viscosity under control. The printer is engineered for ultra-viscous resin up to 8000 cps and works with all mainstream resins. With Anycubic-branded resins the system detects the resin and applies the optimal heating temperature automatically.

Intelligent Assistant 3.0: Leveling, Dynamic Release and AI Inspection

The printer ships factory-calibrated with Leveling-Free 3.0, plus an automatic leveling self-check before each print and a leveling-assist screen that shows live force values at the four corners. Dynamic Release 3.0 adjusts lift height and speed based on real-time layer separation force, and Dynamic Light-Off Compensation 3.0 adapts the wait time to resin flow-back. Optional AI inspection checks build plate installation, bottom-layer separation, resin level and residue (disabled by default; enabling it triggers video recording notifications). Optimised profiles are preloaded for Anycubic resins.

Everyday Usability Upgrades

A resin drip hanger, quick-release build plate and resin vat, an improved pouring spout and a stepless hinged lid that holds at any angle above 45° make daily use cleaner and easier. Printing noise is rated at 45 dB or below, so it suits an office or home workspace. The optional Air Pure 2.0 accessory (sold separately) helps reduce odour.

Wi-Fi/LAN, Camera and Photon Workshop 4.0

An integrated camera lets you submit prints and monitor progress remotely through the Anycubic App. The printer supports Wi-Fi (2.4 GHz) and LAN for fast file transfer, plus a USB-A 2.0 port, and runs with the Photon Workshop 4.0 slicer. A 4.5-inch resistive touch screen handles on-printer control.

Anycubic Photon P1 Max Technical Specifications

What’s in the Box

• Anycubic Photon P1 Max printer
• Print platform
• Resin vat
• Wet wipe
• Hex key set
• Protective equipment
• Funnel
• Scraper x 2
• USB drive
• Power cord
• User manual

Resin is not included. Anycubic resins are recommended to take full advantage of the preloaded optimised profiles.

Who Is the Anycubic Photon P1 Max For?

• Miniature and figure makers: fine detail from the 12K screen plus the space to print large or multiple models.
• Product designers and engineers: large prototypes, enclosures and fit-check parts in a single print.
• Small studios and print farms: batch production with consistent exposure across a big plate.
• Cosplay and props: tall pieces up to 300 mm without splitting the model.

Frequently Asked Questions

What is the build volume of the Anycubic Photon P1 Max?

The print size is 285.5 × 214 × 300 mm, which is 18.3 L of usable volume.

What is the screen resolution of the Photon P1 Max?

It has a 14-inch monochrome 12K LCD with 11520 × 8640 pixels and 24.8 × 24.8 μm square pixels.

Can the Photon P1 Max print with thick or high-viscosity resin?

Yes. It is engineered for resins up to 8000 cps and has a 1.9 L thermal-controlled vat that holds resin at up to 35 °C.

Does the Photon P1 Max need manual bed leveling?

It ships factory-calibrated with Leveling-Free 3.0, and also offers an automatic leveling self-check and a four-corner force display if you want to fine-tune.

Can I monitor prints remotely?

Yes. The built-in camera and Wi-Fi/LAN connectivity let you send jobs and watch progress through the Anycubic App.

Warranty and Support from Voxelstudio

Voxelstudio supplies the Anycubic Photon P1 Max in India with manufacturer-backed warranty coverage and local setup and after-sales support. Contact our team for resin recommendations, accessories like washing and curing stations, or bulk and studio orders.